The vandal resistant recessed ceiling mount housing shall be a VIDEOLARM model RM7 or equivalent. The back box shall be constructed from heavy 10-gauge aluminum and be capable of being installed in its entirety from below the ceiling. The steel top will measure 6.75" (h) x 9.16" (d). The lower dome will be polycarbonate (1 F-stop light reduction for tinted lower dome). The lower dome will be held in place by a die-cast aluminum trim ring (white powder coat finish). The RM7 shall be designed to be installed in either sheetrock or hard ceiling surfaces. Three rotating support arms will allow for adjustment to the ceiling material thickness. The unit shall be fully sealed, designed to meet IP66 dirt/water ingress rating.

The vandal resistant recessed ceiling mount housing shall be a VIDEOLARM model RM7 or equivalent. The back box shall be constructed from heavy 10-gauge aluminum and be capable of being installed in its entirety from below the ceiling. The steel top will measure 6.75" (h) x 9.16" (d). The lower dome will be polycarbonate (1 F-stop light reduction for tinted lower dome). The lower dome will be held in place by a die-cast aluminum trim ring (white powder coat finish). The RM7 shall be designed to be installed in either sheetrock or hard ceiling surfaces. Three rotating support arms will allow for adjustment to the ceiling material thickness. The unit shall be fully sealed, designed to meet IP66 dirt/water ingress rating.

The vandal resistant recessed ceiling mount housing shall be a VIDEOLARM model RM7 or equivalent. The back box shall be constructed from heavy 10-gauge aluminum and be capable of being installed in its entirety from below the ceiling. The steel top will measure 6.75" (h) x 9.16" (d). The lower dome will be polycarbonate (1 F-stop light reduction for tinted lower dome). The lower dome will be held in place by a die-cast aluminum trim ring (white powder coat finish). The RM7 shall be designed to be installed in either sheetrock or hard ceiling surfaces. Three rotating support arms will allow for adjustment to the ceiling material thickness. The unit shall be fully sealed, designed to meet IP66 dirt/water ingress rating.

The vandal resistant recessed ceiling mount housing shall be a VIDEOLARM model RM7 or equivalent. The back box shall be constructed from heavy 10-gauge aluminum and be capable of being installed in its entirety from below the ceiling. The steel top will measure 6.75" (h) x 9.16" (d). The lower dome will be polycarbonate (1 F-stop light reduction for tinted lower dome). The lower dome will be held in place by a die-cast aluminum trim ring (white powder coat finish). The RM7 shall be designed to be installed in either sheetrock or hard ceiling surfaces. Three rotating support arms will allow for adjustment to the ceiling material thickness. The unit shall be fully sealed, designed to meet IP66 dirt/water ingress rating.

The IP Ready SM75 vandal resistant housing shall be an outdoor housing available in either wall (using WMSM7) or surface mounted versions. The ISM75 housing shall be an indoor housing available in either wall (using WMSM7) or surface mounted versions. The SM75 shall be designed to accommodate analog camera systems from Canon & Elmo to IP Ready network cameras from Axis, Canon, Elmo, JVC, Panasonic & Sony; and fixed cameras with a maximum camera length of 7.5". Adapter brackets allow certain models to accommodate several different camera systems. For outdoor enclosures, blowers and thermostatically controlled heaters shall be standard, allowing a temperature range of -25° F to +120° F. Units will be available with 24 VAC inputs. The housing top shall be manufactured from durable cast aluminum. The dome shall be made of optically clear, injection molded polycarbonate material, and shall be held in place with (3) fasteners, and a sealing O-ring shall be included. A safety cable shall be provided to hold the dome while servicing. On Network models the enclosure includes a 24vac to 12vdc (18vdc, JVC model) power supply for single power impute. The outdoor network models also include an 110vac to 24vac transformer. Conduit openings are available on the bottom surface of the housing or by access to a removable side cover. Mounting hardware is protected by mean of removable covers that are secured with captive security fasteners.

The IP Ready SM75 vandal resistant housing shall be an outdoor housing available in either wall (using WMSM7) or surface mounted versions. The ISM75 housing shall be an indoor housing available in either wall (using WMSM7) or surface mounted versions. The SM75 shall be designed to accommodate analog camera systems from Canon & Elmo to IP Ready network cameras from Axis, Canon, Elmo, JVC, Panasonic & Sony; and fixed cameras with a maximum camera length of 7.5". Adapter brackets allow certain models to accommodate several different camera systems. For outdoor enclosures, blowers and thermostatically controlled heaters shall be standard, allowing a temperature range of -25° F to +120° F. Units will be available with 24 VAC inputs. The housing top shall be manufactured from durable cast aluminum. The dome shall be made of optically clear, injection molded polycarbonate material, and shall be held in place with (3) fasteners, and a sealing O-ring shall be included. A safety cable shall be provided to hold the dome while servicing. On Network models the enclosure includes a 24vac to 12vdc (18vdc, JVC model) power supply for single power impute. The outdoor network models also include an 110vac to 24vac transformer. Conduit openings are available on the bottom surface of the housing or by access to a removable side cover. Mounting hardware is protected by mean of removable covers that are secured with captive security fasteners.

The IP Ready SM75 vandal resistant housing shall be an outdoor housing available in either wall (using WMSM7) or surface mounted versions. The ISM75 housing shall be an indoor housing available in either wall (using WMSM7) or surface mounted versions. The SM75 shall be designed to accommodate analog camera systems from Canon & Elmo to IP Ready network cameras from Axis, Canon, Elmo, JVC, Panasonic & Sony; and fixed cameras with a maximum camera length of 7.5". Adapter brackets allow certain models to accommodate several different camera systems. For outdoor enclosures, blowers and thermostatically controlled heaters shall be standard, allowing a temperature range of -25° F to +120° F. Units will be available with 24 VAC inputs. The housing top shall be manufactured from durable cast aluminum. The dome shall be made of optically clear, injection molded polycarbonate material, and shall be held in place with (3) fasteners, and a sealing O-ring shall be included. A safety cable shall be provided to hold the dome while servicing. On Network models the enclosure includes a 24vac to 12vdc (18vdc, JVC model) power supply for single power impute. The outdoor network models also include an 110vac to 24vac transformer. Conduit openings are available on the bottom surface of the housing or by access to a removable side cover. Mounting hardware is protected by mean of removable covers that are secured with captive security fasteners.

The IP Ready SM75 vandal resistant housing shall be an outdoor housing available in either wall (using WMSM7) or surface mounted versions. The ISM75 housing shall be an indoor housing available in either wall (using WMSM7) or surface mounted versions. The SM75 shall be designed to accommodate analog camera systems from Canon & Elmo to IP Ready network cameras from Axis, Canon, Elmo, JVC, Panasonic & Sony; and fixed cameras with a maximum camera length of 7.5". Adapter brackets allow certain models to accommodate several different camera systems. For outdoor enclosures, blowers and thermostatically controlled heaters shall be standard, allowing a temperature range of -25° F to +120° F. Units will be available with 24 VAC inputs. The housing top shall be manufactured from durable cast aluminum. The dome shall be made of optically clear, injection molded polycarbonate material, and shall be held in place with (3) fasteners, and a sealing O-ring shall be included. A safety cable shall be provided to hold the dome while servicing. On Network models the enclosure includes a 24vac to 12vdc (18vdc, JVC model) power supply for single power impute. The outdoor network models also include an 110vac to 24vac transformer. Conduit openings are available on the bottom surface of the housing or by access to a removable side cover. Mounting hardware is protected by mean of removable covers that are secured with captive security fasteners.

The IRHP75 housing shall be an indoor housing with a pendant mount. The IRHP75 shall be designed to accommodate analog camera systems from Canon & Elmo to IP Ready network cameras from Axis, Canon, Elmo, JVC, Panasonic & Sony; and fixed cameras with a maximum camera length of 7.5". Adapter brackets allow certain models to accommodate several different camera systems. Units will be available with 24 VAC inputs. The housing top shall be manufactured from durable cast aluminum. The dome shall be made injection molded polycarbonate material, and shall be held in place with (3) fasteners, and a sealing O-ring shall be included. A safety cable shall be provided to hold the dome while servicing. Access to the enclosure shall be from below. On Network models the enclosure includes a 24 vac to 12vdc (18vdc, JVC model) power supply for single power imput.

The IRHP75 housing shall be an indoor housing with a pendant mount. The IRHP75 shall be designed to accommodate analog camera systems from Canon & Elmo to IP Ready network cameras from Axis, Canon, Elmo, JVC, Panasonic & Sony; and fixed cameras with a maximum camera length of 7.5". Adapter brackets allow certain models to accommodate several different camera systems. Units will be available with 24 VAC inputs. The housing top shall be manufactured from durable cast aluminum. The dome shall be made injection molded polycarbonate material, and shall be held in place with (3) fasteners, and a sealing O-ring shall be included. A safety cable shall be provided to hold the dome while servicing. Access to the enclosure shall be from below. On Network models the enclosure includes a 24 vac to 12vdc (18vdc, JVC model) power supply for single power imput.