ACTi - SET-16-TCD-2100-1-RMK-3000 - SET-16-TCD-2100-1-RMK-3000
Product Overview
The ACTi SET-16-TCD-2100-1-RMK-3000 is a multi-channel video encoder kit for integrating legacy analog CCTV cameras into an IP-based surveillance network. It combines 16 ACTi TCD-2100 single-channel video encoders in one ACTi RMK-3000 rack-mountable chassis.
Key Configuration
Model: ACTi SET-16-TCD-2100-1-RMK-3000; Product type: multi-channel video encoder kit; Included hardware: 16 ACTi TCD-2100 single-channel video encoders; Chassis: ACTi RMK-3000 rack-mountable chassis; Camera input: 16 analog coaxial camera lines; Output function: real-time digital IP video streams; Application: analog-to-IP surveillance migration.
Key Features
• Converts analog CCTV video signals into IP video streams
• Includes 16 single-channel ACTi TCD-2100 video encoders
• Bundled in an ACTi RMK-3000 rack-mountable chassis
• Supports direct connection of 16 analog coaxial camera lines
• Enables analog cameras to be used with network-based VMS platforms
Technical Context
The encoder kit digitizes analog video signals in real time so existing coax-connected cameras can be accessed over a standard local network. This allows facilities to preserve existing analog camera infrastructure while adding IP-based video access and centralized software management.
Installation Notes
The rack-mount chassis is intended for centralized equipment-room installation where multiple analog camera lines terminate in one location. Each analog camera line connects to an encoder channel, allowing the system to bridge legacy coaxial CCTV wiring into the IP surveillance environment.
| Video & Audio | |
| Channels | 16 analog video inputs (BNC connectors) |
| Compression Formats | H.264, MPEG-4, and MJPEG |
| Resolution & Frame Rate | Real-time streaming up to D1 resolution (720 x 480 at 30 fps for NTSC / 720 x 576 at 25 fps for PAL) |
| Multi-Streaming | Supports dual-streaming with independent configurations (e.g., one high-quality stream for recording, one lower-resolution stream for mobile viewing) |
| Audio | 1-channel, two-way audio per encoder module (line-in/line-out) |
| Network & Security | |
| Interface | 10/100 Base-T Ethernet port (RJ-45) per encoder card |
| Protocols | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, and Bonjour |
| Security | IP address filtering, HTTPS encryption, and multi-level password protection |
| System Integration & Hardware | |
| PTZ Control | Built-in serial ports (RS-485, RS-422, RS-232) supporting protocols like Pelco-D/P to control older Pan-Tilt-Zoom analog cameras |
| Alarm I/O | 1 digital input (for motion sensors or door contacts) and 1 digital output (for triggering alarms or lights) per channel |
| Chassis Design | Standard 19-inch rack-mountable form factor (4U height space) |
| Power Supply | The RMK-3000 chassis provides centralized power distribution to all 16 encoder cards, reducing cable clutter |
