SECO-LARM - MVE-AH1E1-01UQ - HDMI Extenders with KVM with USB 2.0 KVM and Loop-Out, Up To 70m
Product Overview
The SECO‑LARM MVE‑AH1E1‑01UQ is an HDMI over Cat6 extender with USB 2.0 KVM support, transmitting 1080p signals up to 230 feet (70m) with zero latency. It features an HDMI loop‑out at the transmitter for a local monitor, L/R audio output at the receiver, and HDCP 1.4 compliance. The system includes surge, lightning, and ESD protection (±8kV air, ±4kV contact), operates from -20°C to 60°C over T‑568B Cat6 cabling, and provides a point‑to‑point connection for keyboard and mouse control at the remote display.
Key Configuration
• Maximum range: 230ft (70m) at 1080p over Cat6/6A/7
• Resolutions: 1080p, 1080i, 720p, 480p, and PC resolutions up to 1920×1080
• Video input/output: HDMI Type A 19-pin female
• Audio formats: PCM, LPCM, DTS-HD, DTS-Audio
• Power: 5VDC @ 1A (two adapters included)
• Dimensions: 74 × 85 × 19 mm; weight: 180g
| Input video signal | 3.3V |
| Input DDC signal | 5Vp-p (TTL) |
| Maximum single link range | 230ft (70m) |
| Video formats supported | High-speed HDMI, HDCP 1.4 |
| Audio formats supported | PCM, LPCM, DTS-HD, DTS-Audio |
| Output Video | HDMI |
| Resolutions supported | 1080p,1080i, 720p, 576p, 576i, 480p, 480i, 1920×1080, 1680×1050, 1440×900, 1366×768, 1280×960, 1280×720, 1024×768, 800×600 |
| Range (Cat6/6A/7) | Up to 230ft (70m) |
| Video input connector | HDMI Type A 19-pin female |
| Maximum input cable length | 26ft (8m) AWG24 |
| Video output connector | HDMI Type A 19-pin female |
| Maximum output cable length | 26ft (8m) AWG24 |
| Cat6 Wiring standard | T-568B |
| Operating voltage | 5VDC |
| Power supply | 5VDC@1A |
| ESD Protection | ±8kV (air-gap discharge), ±4kV (contact discharge) |
| Current Draw | Transmitter & Receiver: <2.5W |
| Operating humidity | 0~90% |
| Operating temperature | -4°~140° F (-20°~60° C) |
| Dimensions | 2-15/16″x3-3/8″x3/4″ (74x85x19 mm) |
| Weight | 6.3-oz (180g) |
