Product Overview
WI-AP229BE is a high-performance Wi-Fi 7 tri-band ceiling-mount access point for high-density indoor environments such as hotels, offices, and stadiums. It supports IEEE 802.11a/b/g/n/ac/ax/be with combined wireless speeds up to 9300Mbps across the 2.4GHz, 5GHz, and 6GHz bands. Multi-Link Operation, Multi-RUs, MU-MIMO, OFDMA, 4K-QAM, 320MHz channels, 802.3bt PoE, and cloud management support high-throughput and low-latency network deployments.
Key Configuration
Model: WI-AP229BE | Wireless Standard: IEEE 802.11a/b/g/n/ac/ax/be | Data Rate: 2.4GHz 688Mbps, 5GHz 2882Mbps, 6GHz 5764Mbps | MIMO: 2×2 MU-MIMO on all three bands | Connectivity: 1×10Gbps SFP+ slot, 1×2.5G RJ45 WAN port, 1×2.5G RJ45 LAN port | Power: 802.3bt PoE or 12V/3A DC | Coverage: Up to 200m²
Key Features
- · Wi-Fi 7 tri-band connectivity with combined speeds up to 9300Mbps
- · 2.4GHz speed of 688Mbps, 5GHz speed of 2882Mbps, and 6GHz speed of 5764Mbps
- · 2×2 MU-MIMO on the 2.4GHz, 5GHz, and 6GHz bands
- · Multi-Link Operation and Multi-RUs improve throughput and reduce latency
- · 4K-QAM and up to 320MHz channel width on the 6GHz band
- · 10Gbps SFP+ slot supports high-bandwidth wired uplinks
- · 2.5G RJ45 WAN port with 802.3bt PoE input and 2.5G RJ45 LAN port
- · Supports up to 500 users, with 300 users recommended
- · Multiple SSIDs with IEEE 802.1Q VLAN and SSID-to-VLAN mapping
- · Cloud, web-based, and AC management with automatic channel and power adjustment
Technical Context
Multi-Link Operation allows compatible devices to communicate across multiple bands and channels, while Multi-RUs improves the use of available radio resources. OFDMA and MU-MIMO support simultaneous communication with multiple clients, and 4K-QAM increases the amount of data carried per symbol. The 10Gbps SFP+ interface provides a high-capacity uplink for demanding wireless deployments.
Installation Notes
The access point is designed for ceiling-mounted installation and measures 206 × 206 × 41mm, excluding mounting kits. It supports 802.3bt PoE input through the 2.5G WAN port or 12V/3A DC power. Operating temperature is -10°C to 55°C with 10%-95% non-condensing humidity.
| General | |
| Model | WI-AP229BE |
| Hardware Version | V1 |
| Product Type | Wi-Fi 7 9300 Mbps tri-band ceiling-mount access point |
| Hardware | |
| Memory | 1024 MB RAM 128 MB Flash |
| Interfaces | 1 × 10 Gbps SFP+ slot 1 × 2.5G RJ45 WAN port with 802.3bt PoE input 1 × 2.5G RJ45 LAN port |
| Button | 1 × Reset button Long press for 8 seconds to restore the factory default configuration. |
| LED Indicators | System, WAN, LAN, SFP |
| Power Supply | 802.3bt PoE input or 12 V DC / 3 A |
| Maximum Power Consumption | < 36 W at full load |
| Wireless | |
| Wireless Standards | IEEE 802.11a/b/g/n/ac/ax/be |
| Maximum / Recommended Users | 500 / 300 |
| Data Rates | 2.4 GHz: up to 688 Mbps 5 GHz: up to 2882 Mbps 6 GHz: up to 5764 Mbps |
| MIMO | 2.4 GHz: 2 × 2 MU-MIMO 5 GHz: 2 × 2 MU-MIMO 6 GHz: 2 × 2 MU-MIMO |
| Antenna Gain | 2.4 GHz: 1.7 dBi 5 GHz: 4 dBi 6 GHz: 4 dBi |
| Frequency | 2.4 GHz: 2.4 GHz to 2.484 GHz 5 GHz: 5.150 GHz to 5.850 GHz 6 GHz: 5.925 GHz to 7.125 GHz Please follow national regulations when selecting the appropriate frequency. |
| Channel Width | 2.4 GHz: 20/40 MHz 5 GHz: 20/40/80/160 MHz 6 GHz: 20/40/80/160/320 MHz |
| Maximum Transmit Power | 2.4 GHz: 24 dBm 5 GHz: 23 dBm 6 GHz: 22 dBm |
| Coverage Range | 200 m² Measured in an unobstructed ideal environment. Actual coverage depends on client performance and environmental interference. |
| Software Features | |
| Wireless Modes | Fit AP, Repeater, Wireless Router, WISP Default: Fit AP mode |
| LAN Configuration | Static IP, Dynamic IP |
| WAN Configuration | Static IP, Dynamic IP, PPPoE Client |
| Wireless Configuration | Wireless enable/disable, SSID modification, SSID hiding |
| Wireless Security | WPA-TKIP, WPA2-AES, WPA1/WPA2-Mixed, WPA2/WPA3-Mixed, WPA/WPA2-Enterprise |
| VLAN | IEEE 802.1Q VLAN, SSID-to-VLAN mapping |
| Wi-Fi Schedule | Yes |
| RF Parameters | Adjustable country Automatic channel width selection Automatic frequency selection Adjustable transmission power Maximum associated stations Weak signal rejection threshold, default -95 dBm User isolation, disabled by default Wi-Fi Multimedia (WMM) |
| Advanced Features | Multi-Link Operation (MLO) 320 MHz channel width 4K-QAM Multi-RUs Multiple SSIDs, up to 8 per radio Ping Watchdog Scheduled reboot DHCP Server NTP Server Diagnostics: Ping, Traceroute |
| Status Monitoring | LAN/WAN information Wireless information System information Radio status Real-time flow chart Wireless terminal stations SSID list DHCP client ARP table Routing table |
| Management | Device discovery tools Local web-based management Remote management via Wi-Tek Cloud and applications AC management |
| Mechanical | |
| Product Dimensions | 206 × 206 × 41 mm Excluding mounting kits. |
| Product Weight | 0.92 kg Excluding mounting kits. |
| Installation | Ceiling-mounted |
| Environmental | |
| Operating Temperature | -10 to 55 °C (14 to 131 °F) |
| Storage Temperature | -40 to 70 °C (-40 to 158 °F) |
| Operating Humidity | 10% to 95%, non-condensing |
| Storage Humidity | 5% to 95%, non-condensing |
| Package Contents | |
| Included Items | Access point × 1 Plastic anchors × 4 Self-tapping screws × 4 Ethernet cable × 1 Quick installation guide × 1 |
| Certifications | |
| Certifications | CE, FCC, RoHS, UKCA, RCM |
