Wi-Tek - WI-PCES206-O - Cloud Easy Smart 100Mbps PoE Outdoor Waterproof Switch

Part number:
Price:

Product Overview

This Wi-Tek Cloud Easy Smart 100Mbps PoE Outdoor Waterproof Switch is designed for outdoor CCTV and PoE access deployments that require weather-resistant operation, cloud management, IP camera discovery, and smart PoE functions. It provides four 100Mbps RJ45 PoE ports, two 100Mbps RJ45 uplink ports, Hi-PoE support on ports 1-2, and an IP65 weatherproof and dustproof enclosure.

 

Key Configuration

Product Type: Cloud Easy Smart Managed 100Mbps Outdoor Waterproof PoE Switch | PoE Ports: 4 x 100Mbps RJ45 | Uplink Ports: 2 x 100Mbps RJ45 | PoE Output: Ports 1-2 support Hi-PoE up to 45W; ports 3-4 support 802.3af/at | Total PoE Budget: Up to 62.7W | Protection Rating: IP65 | Smart Modes: 250m Extend Mode, Port VLAN Mode, PD Alive Mode | Camera Discovery: ONVIF Support | Management: Wi-Tek Cloud

 

Key Features

 · Provides four 100Mbps RJ45 PoE ports for powered network devices

 · Includes two 100Mbps RJ45 uplink ports for network connectivity

 · Ports 1-2 support Hi-PoE output up to 45W

 · Ports 3-4 support IEEE 802.3af/at PoE devices

 · Total PoE power budget of up to 62.7W supports small outdoor PoE deployments

 · 250m Extend mode supports longer-distance PoE transmission

 · Port VLAN mode supports traffic isolation

 · PD Alive mode helps detect and recover unresponsive powered devices

 · IP65 weatherproof and dustproof enclosure supports variable outdoor environments

 · Alarm notifications support real-time maintenance

 · ONVIF support helps automatically identify connected IP cameras

 · Wi-Tek Cloud management enables real-time monitoring and remote configuration

 

Technical Context

This switch is intended for outdoor surveillance networks where a small number of IP cameras or PoE devices need 100Mbps access and cloud-based maintenance. The IP65 enclosure helps protect the switch from dust and weather exposure in variable outdoor environments.

Extend mode, Port VLAN mode, PD Alive mode, ONVIF discovery, alarm notifications, and Wi-Tek Cloud management help simplify CCTV deployment, troubleshooting, device recovery, and remote administration.

 

Installation Notes

This outdoor PoE switch is suitable for CCTV and PoE access installations requiring weather-resistant deployment and remote cloud management. PoE planning should account for the total 62.7W power budget, with Hi-PoE available on ports 1-2 and 802.3af/at support available on ports 3-4.

ModelWI-PCES206-O
Hardware VersionV1
Interfaces
Downlink Ports4 × 10/100Mbps RJ45 PoE Ports
Uplink Ports2 × 10/100Mbps Ethernet Ports
PoE
PoE PortsPorts 1-4
PoE StandardPorts 1-2: Hi-PoE, 45W
Ports 3-4: IEEE 802.3af/at, 30W
PoE Pin Assignment1/2 (+), 3/6 (-)
PoE Power Budget60W
Switch Properties
Standards and ProtocolsIEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3ab (Gigabit Ethernet)
IEEE 802.3af (Power over Ethernet)
IEEE 802.3at (Power over Ethernet Plus)
Forwarding ModeStore and Forward
Switching Capacity1.2Gbps
Packet Forwarding Rate0.89Mpps
MAC Address Table8K
Packet Buffer Memory4Mbit
Jumbo Frame9216 Bytes
Flash Memory16MB
Power Supply
Input Power100-240V AC, 50/60Hz
Power ConsumptionIdle: 3W
100% Traffic Rate with PoE: 63W
Physical Characteristics
LED IndicatorsPWR (Orange):
On: The device is powered on normally
Off: The device is powered off or has failed
PoE (Orange):
On: PoE enabled
Off: PoE disabled
Link (Orange):
On: Port connected
Off: Port disconnected
Blinking: Data transmission
DIP Switch FeaturesExtend: Extends PoE transmission distance up to 250m at 10Mbps
VLAN: Each PoE port can transmit data only to uplink ports
PD Alive: Detects and reboots offline compatible PoE powered devices
ButtonReset: Hold for >5 seconds to restore factory defaults
Fan QuantityFanless
Switch Dimensions314 × 210 × 89mm
Package Dimensions405 × 253 × 97mm
WeightNet Weight: 1.06kg
Package Weight: 1.77kg
InstallationWall-Mounted, Pole-Mounted
Reliability
Surge ImmunityIEC 61000-4-5
Common Mode: 4kV
Differential Mode: 2kV
ESD ProtectionIEC 61000-4-2
Contact Discharge: 6kV
Air Discharge: 8kV
Environmental
Operating Environment-30℃ to 60℃ (-22℉ to 140℉); 10% to 90% RH, non-condensing
Storage Environment-40℃ to 70℃ (-40℉ to 158℉); 5% to 90% RH, non-condensing
Certification
CertificationCE, FCC, RoHS, UKCA, RCM
Name
Description
Size
Downloads
File
User Manual
1.1mb
File
Datasheet
4.8mb