PLANET POE Managed PoE Injector Hub series, a cost-effective and quick PoE solution, is designed to perfectly upgrade an existing network infrastructure to IEEE 802.3at Power over Ethernet Plus network system without replacing the existing Ethernet Switch.
Features:
Interface
- 48-port RJ45
- 24-port 10/100/1000Mbps “Data input”
- 24-port 10/100/1000Mbps “Data + Power output”
- One 10/100/1000BASE-T management port
Power over Ethernet
- Complies with IEEE 3at Power over Ethernet Plus mid- span PSE
- Up to 24 IEEE 3at/802.3af devices powered
- 440-watt PoE budget
- Supports PoE power up to 8 watts (802.3at PoE+)/15.4 watts (802.3af PoE) for each PoE port
- Automatically detects PD
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
PoE Management
- Total PoE power budget control
- Per port PoE power schedule
- PoE function enable/disable
- Per port PoE function enable/disable
- PoE port power feeding priority
- PD classification detection
- Over temperature protection
- PD alive check
Management
- Web interface for remote management
- Supports Network Time Protocol (NTP)
- Firmware upgrade through Web interface
- PLANET Smart Discovery utility automatically finds PLANET
devices on the network
- SNMP trap for alarm notification of events
- System log/remote syslog
Hardware
- 19-inch rack mountable; 1U height
- Reset button for resetting to default setting and system reboot
- LED indicators for PoE ready and PoE activity
- LED indicators for power alert and fan alert
| Product | POE-2400G | |
| Hardware | ||
| Hardware Version | 5 | |
| Interface | “Data” Input Ports | 24 x RJ45 |
| “Data+Power” Output Ports | 24 x RJ45 | |
| Management Port | 1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX | |
| Data Rate | 10/100/1000Mbps | |
| LED | System: SYS PWR x 1 (Green) PoE Failure x 1 (Red) Fan1 Failure x 1 (Red) Fan2 Failure x 1 (Red) Per PoE Port: PoE-in-use x 1 (Green) Management port x 2: 1000 (Green), 10/100 (Orange) | |
| Network Cable | 10BASE-T: 4-pair UTP Cat5 up to 100m (328ft) 100BASE-TX: 4-pair UTP Cat5 up to 100m (328ft) 1000BASE-T: 4-pair UTP Cat5e/6 up to 100m (328ft) EIA/TIA- 568 100-ohm STP (100m) | |
| Power Requirements | 100-240V AC, 50/60 Hz, 8A | |
| Power Consumption | 500 watts (max.) | |
| Ventilation | Fan x 2 | |
| Dimensions (W x D x H) | 440 x 300 x 44mm | |
| Power over Ethernet | ||
| PoE Power Supply Type | Mid-span | |
| PoE Power Output | Per port DC 52V 30.8/15.4 watts | |
| Power Pin Assignment | 4/5(+), 7/8(-) | |
| PoE Power Budget | 440 watts@0~40 degrees C 400 watts@41~50 degrees C Auto power budget control by over temperature protection function | |
| Number of 802.3af PDs (Class 0, 1, 2, 3) can be powered | 24 | |
| Number of 802.3at PDs (Class 1, 2, 3) can be powered | 14 | |
| Number of 802.3at PDs (Class 0, 4) can be powered | 14 | |
| Management | ||
| Management Interface | Web, PLANET Smart Discovery Lite | |
| PoE Management | Power limit by consumption and classification mode PoE admin mode Per port power schedule Per port power enable/disable Power feeding priority Over temperature protection Current per port usage and status Total power consumption | |
| Management Feature | Setup of system/management functions Web firmware upgrade SNMP trap for alarm notification of events | |
| Standards Conformance | ||
| Regulatory Compliance | FCC Part 15 Class A, CE | |
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet RFC 768: UDP RFC 791: IP RFC 2068 HTTP RFC 1157: SNMP v1 RFC 1902: SNMP v2c RFC 5424: Syslog | |
| Environments | ||
| Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 90% (non-condensing) | |
| Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 90% (non-condensing) | |
