Vigitron - Vi2301A - 1-Port MaxiiCopper™ Ethernet Extender over UTP, af/at/bt 72W PoE, Requires PoE source or optional Vi0012 power supply
Part number:
Vi2301A
Price:

1-Port MaxiiCopper Ethernet Extender over UTP, 60W PoE or optional Vi0012 power supply . Vigitron’s MaxiiCopper™ Vi2301A UTP Ethernet extender brings new performance standards to the growing need for high speed transmission of full bandwidth Ethernet and high-power PoE power over extended distances. Its unique Symmetric Bandwidth (SBW™) assures full bandwidth transmission is maintained over the entire operational distance for both uploads and downloads with Virtual Zero Packet Loss (VZPL™). Bandwidth assurance provides the ability to transmit multiple cameras on single camera runs with no information loss. It can use 1 pair or 4 pairs of UTP and requires no switch setting or network programming.

 

Extended Pass Through PoE (EPTP™) eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE network switch, to provide power to both transceivers and the camera. The Vi2301A can pass through PoE power, up to 74W. Type tested under NEMA-TS2 environmental standards for extended temperature operation between -40°C to +75°C. The Vi2301A is the perfect solution for extended distance data and power transmission for warehouses, parking lots, campuses, casinos, and many more. MaxiiCopper’s Vi2301A is low power and can easily fit inside most cameras housing and junction boxes. Best of all, it is MegaPixel Certified (MPC™), type tested to network packet performance standards, and major camera brand compatibility tested to assure you error free and reliable operations. The Vi2300A series is available in single, four, eight and sixteen port configurations to meet every application requirement.

 

Installation cost savings, proven performance, and major camera brand compatibility all go into making Vigitron’s MaxiiCopper™ Vi2301A the best choice for extended distance data and power transmission.

 

Features:

  •  Extends Ethernet beyond 328 feet (100 m) limitation up to 3,000 feet (914 m) over UTP cables.
  •  Requires no switch setting or network programming.
  •  Extended Pass Through PoE (EPTP™) compatible with 802.3af, 802.3at and PoE++ up to 74W. 
  •  Mega-Pixel Certified (MPC™) High data rate, ideal for high bandwidth requirements of Mega-pixel cameras, multiple IP cameras systems, and cameras requiring Jumbo Frame transmission.
  •  Symmetric Bandwidth (SBW™) provides consistent upload and download with Virtual Zero Packet Loss (VZPL™).
  •  Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards.
  •  Supports one-pair or four-pair UTP wires with built-in transceiver cable connectivity tester.
  •  Type tested for -40°C to +75°C temperature range under conforming to NEMA-TS2 testing standards.
  •  Data rate selectable to for maximum bandwidth utilization.
  •  Complies to major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPS.
  •  USA designed and manufactured.
  •  Limited Life Time Warranty

Electrical

Ethernet Interface

Standard 10/100BaseT

Data Rate

Auto select 10/100 Mb/s
Full speed / full duplex at maximum rated distance

UTP

100 Ohm +/- 20%, Cat5 or better
10BaseT: up to 3,000 ft. (914 m)
100BaseT: up to 2,100 ft. (640 m)

Power 

12 VDC, 24 VAC, POE af/at @150 mA maximum

Status LEDs

Power On
Standard Ethernet: Traffic, Link
Extended Ethernet: Traffic, 10/100BaseT

Connectors

Ethernet Interface: RJ-45 Connector
Extended Interface: RJ-45 Connector
Power: IEC380-8 inlet

RFC

2544 TCP/IP Packet Transmission

Compatible with

IEEE 802.3af PoE, IEEE 802.3at PoE, UPoE Compliant

PoE Compatibility

IEEE 802.3af, IEEE 802.3at

RFC 768 UDP, 2068 HTTP, 793 TCP
791 IP, 1783 TFTP, 894 IP over Ethernet
Jumbo Frame Support YES

Regulatory

Safety CE
Emissions EN 5502:2006+A1:2007
EN 61000-3-2:2006+A1:2009+A2:2009
EN 61000-3-3:2008
EN 55024:1998+A1:2001+A2:2003
FCC Part 15, Subpart B, Class B 2010

Environmental

Humidity 0 to 95%, non-condensing
Temperature Operating: -40°C to +75°C per NEMA-TS2 testing
Storage: -40°C to +85°C

Mechanical

Dimensions 1.15x1.6x3.73 in., 3.0x4.0x9.5 cm (HxWxL)
Weight 0.212 lb, 96 g
Material Extruded Aluminum

Accessories

• 12 VDC wall-mount power supply (optional) 
Name
Description
Size
Downloads
File
Datasheet
0.4mb
File
User Manual
0.4mb
File
Application Drawings
0.1mb